Main Products: Protective Cases for guns and drones
IPX7 INGRESS PROTECTION WATERPROOFNANUK cases can be submerged in up to 1 m of water for a period of 30 minutes without leakage or damage of any sort. ASTM D-4169 DC-18 DROP TESTFor the drop test, weights ranging from 6.8 to 31.8 kg fall on to the case from a height of no less than 48 cm. Drop weight is determined by case size. IP6X INGRESS PROTECTION DUSTPROOFNANUK cases demonstrate 100% protection against dust. Nothing gets in. ATA SPECIFICATION 300 CATEGORY 1 IMPACTNANUK cases are suitable for a minimum of 100 airline trips. NANUK also stands up to heavy impacts. No damage occurs when a 6 kg dart falls on to the case's weakest point from a height of 0.5 m. ASTM D-4169 DC-18 VIBRATIONThis evaluation determines NANUK's ability to withstand repetitive shocks that can occur during loose-loaded transportation. NANUK stands up to this extreme test of vibration resistance. ASTM D-4169 DC-18 RAINFALLSimulated rainfall lasts 20 minute?s? per case side at a rate of 10? ?cm/hr. During a second test, rain falls at a rate of 10? ?cm/hr while the case is heated 18 degrees F higher than the water?’s? temperature. The second test lasts 4 hours. No water finds its way in. MIL-STD-810F IMMERSIONThe case is submerged in a basin of water 1? ?m deep for 1 hour. For this test, the case is heated to 40 degrees F higher than the water?’s? temperature. Again, NANUK easily withstands these extreme conditions LIFETIME WARRANTYNANUK cases are manufactured in Canada and are tested in some of the harshest conditions.Every NANUK case comes with a lifetime guaranty so that if there is a problem with your case then it will either be repaired and returned, or a new one shipped out to you.